OK well got the chop pulled apart and figured I would start doing some cheep mods.
first up the tach.
My tachOmeter has green led lights running up the rpms.
then it turns to orange led lights.
I figured I would pull the tach apart and put in a new color.
how about blue????
check it.
first take off the four allen screws holding on the tank.
there right under the tank with nice chrome covers. Yep those ...... Yank!!!!!!!!
throw those bitches on the ground for you to step on later.
2) Next losen the 2 bolts to the handle bars......... fuck it !!!!!!!!!! losen up all the shit on the handle bars!
drop some stuff in a jar.. so you don't lose too much.
turn the petcock off on the tank then unscrew the hose clamp on the gas line.
I stuck something in the hose so it would not drip on the bike or me. (a drill chuck).
3) Pull that fucking tank off.
there we go ..... ok I forgot what I was goig to do.........?????
????
????
OH wait that's right start pulling the tach.
4)unpluge both tack plugs that were under the tank.
these ones
5)Undew this allen acorn combo here.
this lets the wire lose to pull out.
6) Undew the allens on the out side of the speedo.
then pull the wires free.
now there is a small allen left on the speedo outside undo this too.
now pull the speedo apart.
undew the 2 screws holding the speedo and tach together.
unplug the plugs and cut any zip ties.
33) there should be a lock ring holding the led board in the houseing.
pop that away.
I used hemostats. go figure.....
pull the board lose.
I stard heating the leds using a solder sucker ad removing the lights.
here are new leds
Hmmm ran out of pictures.....
Ok solder in new leds and put everything back together.
After I do this I will post some more picture.
